Tuesday Tutorial (on Wednesday): Super Easy Rosette FOE Headband

Sorry I’m late this week! That holiday on Monday really just threw me off 🙂 How about you?

Who’s ready for another super easy and fast tutorial? I find this headband to be uber adorable, and it is so quick to make! You could make several of these in a matter of minutes. And, this would make a beautiful custom baby shower or birthday gift.

IMG_5298Ma

Materials Needed:

IMG_4593Fold Over Elastic Headband

Rolled Rosette Flowers

Glue Gun

Step One:

Put some hot glue on the back of one of your rosette flowers. Then, adhere the rosette flower to the fold over loop on your headband.

IMG_4594 IMG_4595FullSizeRender 4That’s even cute all by itself, isn’t it?

Step Two:

Now, repeat step one with the other two rosettes, gluing them on either side of that first one.

FullSizeRender 5Boom! Your done. Ha ha. How simple is that?! You could literally create a dozen in less than a half hour.

Thanks for joining us for another awesome tutorial today. We’d love for you to come back and checkout some of the other great tutorials at Always Under Pay!

Also, check our Facebook page later this week for a chance to win this lovely piece.

Tuesday Tutorial: Felt Flower on Chevron Print Headband

IMG_4833aThis is our fourth and final post on the “What the heck to do with those felt circles?” series. We know we can use them to attach to the backs of flowers and things, but it’s nice to have more than one use for something, don’t you agree?

Today we’re going to learn how to make this sweet felt flower headband. Let’s get started!

Materials Needed:

IMG_4820Felt Circles

Chevron Print Fold Over Elastic Headband

15 MM Pearlies Center Embellishment

Scrap of Felt Fabric

Glue Gun

Scissors

Step One:

Take your scrap piece of felt and cut a circle roughly 1-1/4″ in diameter (mine is bigger in the photo, but I trimmed it down a bit). It doesn’t need to be a perfect circle. You won’t see it once we’re done.

Set this piece aside for now.

IMG_4821Step Two:

Take one of your felt circles and put a dab of hot glue right near the edge like this:

IMG_4824Quickly, before the glue dries (but careful not to burn your fingers), pinch the felt circle on each side of the glue to create a petal piece. Like this:

IMG_4825You’re going to want to make about 10 of these petals.

Step Three:

Once you have all of your petals made, we’re going to start hot gluing them to the felt circle scrap from step one. I just placed a small bit of hot glue on the back of each petal and quickly placed it on the felt circle so that the pinched end was right about in the center of the circle.

IMG_4826IMG_4827It’s gonna be a bit messy. So just do your best to pick off any strands of hot glue. You can also take a lighter and quickly touch a flame to the hot glue to make it clear and less noticeable. Most of the mess in the center will be covered in the next step.

You can also trim any excess of the scrap felt circle that may be showing at this step too. This is what it will look like from the back.

IMG_4830Step Four:

Place a small dob of hot glue in the center of the felt flower that you’ve just completed. Then quickly place the pearl embellishment on top of the hot glue before it dries.

IMG_4828IMG_4829

Step Five:

Now just hot glue the back of your little felt flower to the loop on your elastic headband.

IMG_4831IMG_4832The end! So easy, right?! And you can make them in a number of different colors. You could even alternate the colors of the petals for a multicolor look. So fun!

Thanks for joining us for this awesome tutorial today. We’d love for you to come back and checkout some of the other great tutorials at Always Under Pay!

Also, check our Facebook page later this week for a chance to win this sweet thing.

Tuesday Tutorial: Mini Felt Circle Flower Headband

 

mini felt flower headband1

Here is our second of four posts on what the heck to do with those felt circles. We know we can use them to attach to the backs of flowers and things, but it’s nice to have more than one use for something, don’t you agree?

Today we’re going to learn how to make these super adorable little mini felt circle flowers. You can use these on headbands or clips, as an embellishment for a card or scrapbook page, on wood craft decor, on a handmade wreath, etc. The craft possibilities are almost endless. But, today, I am going to attach them to a skinny cotton headband.

Let’s get started!

Materials Needed:

IMG_430221 Felt Circles–7 each of 3 different colors (the photo shows 6, but I promise you’ll need 7)

Skinny Cotton Headband

Glue Gun

Step One:

Take one of your felt circles and fold it in half, then fold it in half again. (Please ignore the horrifying condition of my nails 🙂 I need a manicure! Lol)

IMG_4303IMG_4304

Step Two:

Hot glue the folded felt circle you just did to one of the flat felt circles you have in the same color.

IMG_4306

Step Three:

Make three more folded felt circles in the same color and hot glue them next to each other on that same flat felt circle you did on step two. DO NOT GLUE THE FOLDS DOWN. Just glue the bottom piece of your fold to the flat felt circle. It will look something like this when the four pieces are glued on there. See how they are lifting a little on top? That is supposed to happen!

IMG_4307

Step Four:

Take your fifth felt circle, fold it in halves like in step one, and glue the corner down into the center of your flower. Wait a few seconds for it to dry, the pinch your ‘flower petals’ a bit to fluff them and make them look more like a flower bud.

IMG_4308IMG_4309

Step Five:

Repeat the above steps to make two more flowers in the other colors you have left.

IMG_4310

Step Six:

Using your hot glue gun, attach the three mini felt flowers you have made to the outside edge of your skinny cotton headband (so the rough, curled edge is inside). Be careful not to burn yourself!

FullSizeRender 2

Step Seven:

Hot glue the last piece of each felt circle to the back of each coordinating flower.

IMG_4312

And, we’re done! Isn’t that just a sweet and simple little headband? So cute!

FullSizeRender

Thanks for joining us for this awesome tutorial today. We’d love for you to come back and checkout some of the other great tutorials at Always Under Pay!

Also, check our Facebook page later this week for a chance to win this lovely beauty.

Tuesday Tutorial: Woodland Fairy Halo Headband

Ad

I think I’m in love with this halo! It is so pretty and fun. This is my niece, Jordyn, and she completely agrees. She had tons of fun playing and modeling this for me. She said she felt like a fairy queen.

Would you like to know how to make some of these for your own daughters, nieces, granddaughters or other little friends? Let’s get started!

Materials Needed:

IMG_42106 yards 6″ Emerald Green Tulle

2 yard 6″ Lime Green Tulle

1 yard each 3/8″ grosgrain ribbon in 4 colors of your choice (I used shocking pink, light pink, lavender, purple, and lime green)

6 Rolled Rosette Flowers that coordinate with your ribbon choices (I used hot pink, purple, lavender and light pink)

Round Headband Base of some sort (Mine is a bridal halo I got in the bridal section of a craft store a long time ago). If I didn’t have this, I could have easily used a 1/2″ zip tie or something similar.

Hot Glue Gun

Scissors

Step One:

Cut all of your tulle into about 4″ lengths, then cut those in half so you have two pieces, each 3″ wide. You should have a good size stack of 3″ X 4″ tulle pieces (I had a picture of this step, but I must have deleted it. Woops, sorry!). I’m guessing you’ll have about 140+ pieces. You may not use them all, depending on the size of your halo base, but you will use most.

Step Two:

Begin tying your tulle pieces to your round halo base. I tied a double knot so they won’t come undone.

IMG_4211Continue doing this until you have about 1.5″ left at the end. I tied 4-5 pieces of the emerald green, then 2 pieces of the lime.

IMG_4213

IMG_4215Step Three:

Tie your ribbon pieces into that small 1.5″ section you left open at the end. Then fill in any blank spaces with a bit of tulle.

IMG_4216Step Four:

Use your hot glue gun to attach three of your rolled rosette flowers over the ribbon tails.

IMG_4240

IMG_4241

Step Five:

Hot glue the other three rolled rosette flowers to three evenly spaced spots on your halo as shown below.

 

FullSizeRender

Step Six:

Now you just need to trim up your ends on the ribbon and shape/trim the tulle to your liking. I used a lighter to heat seal the ends of the grosgrain ribbon so that they will not fray.

And your done! I think your girls are going to love it! I know Jordyn does!

IMG_4323

Thanks for joining us for this awesome tutorial today. We’d love for you to come back and checkout some of the other great tutorials at Always Under Pay!

Tuesday Tutorial: Shabby Flower Crib Shoes

Shabby Flower Shoes AdI think our baby crib shoes are super cute without any added details. However, I am a crafter, and I’m always getting the urge to jazz things up a bit, you know? Make something mine so to speak. So today I thought I would show you how to jazz those shoes up a bit!

Materials Needed:

Crib Shoes of your choice (I chose red/white dot for this tutorial)

2 Shabby Flowers (I’m using white for this tutuorial)

2 Center Embellishments (I picked red/white dot fabric covered centers)

2 Felt Circles (I’m using white for this tutuorial)

Glue Gun

Shabby Flower Shoes 1Step One:

Using your glue gun, squeeze a small dab of hot glue onto one of your felt circles, then quickly and carefully stick it to the center back of one of your shabby flowers. (Be careful not to burn your fingers.)

Shabby Flower Shoes 2Step Two:

Now squeeze a small dab of hot glue onto your center embellishment and then stick it into the center front of your shabby flower. Don’t try putting the glue onto the flower. It will cause issues with the flowers sticking to itself and make a mess.

Shabby Flower Shoes 3Step Three:

Next, place a bit of hot glue on the back of the felt circle that you glued onto the back of your flower. Then, stick the flower assembly to the shoe like so.

Shabby Flower Shoes 4

Isn’t that so super cute? And easy? Don’t you just want to make more? I did! So, I made a few more. I did these all in 0-3 mos size, but we do carry the crib shoes in sizes from 0-12 months. Aren’t they cute?

Psssst…..Watch our Facebook page for a chance to win two pair!

Shabby Flower Shoes 6

And, as always, thanks for joining us for this awesome tutorial today. We’d love for you to come back and checkout some of the other great tutorials at Always Under Pay!

 

 

Tuesday Tutorial: Shabby Flower Bookmark

Shabby Flower Bookmark AdI don’t know about you, but around here we usually have a summer reading list for our kids to complete during summer break. Even if you don’t, reading is a great thing for kids to do during the summer. Especially when they’re complaining that they are bored or it’s too hot to go outside. Reading keeps kid’s minds active and helps them retain all that information they worked hard to learn over the school year.

What better way to encourage a young reader than with a sweet little bookmark like this? It’s fun to use, and super easy to make! We’re going to show you how to do just that today.

Materials Needed:

2 Shabby Flowers

2 Fabric Covered Centers or Other Center Embellishments

12″-15″ Length of 3/8″ Grosgrain Ribbon

Glue Gun

1Step One:

Using your glue gun, hot glue one embellishment to the center of each of your shabby flowers as shown below.

2Step Two:

Hot glue one end of the 3/8″ ribbon to the backside of one of your flower embellishments like so.

3Step Three:

Now put a dob of hot glue in the center back of the same flower you’ve been working with like this:

4

Then, lay your other flower on top of that dob of glue sandwiching the ribbon between the two flowers.

016Step Four:

The pic didn’t turn out well on this part, but it’s easy. Just trim the ribbon to whatever length you desire, then use a lighter or other heat source to seal the end of the ribbon from fraying.

Voila! Wasn’t that simple? And it’s a cute little token to encourage your young reader this summer!

Thanks for joining us for this awesome tutorial today. We’d love for you to come back and checkout some of the other great tutorials at Always Under Pay!

Tuesday Tutorial: Patriotic Shabby Chic Flower Chevron Headband

Shabby Flower Chevron Headband AnnouncementToday you will learn how to make this super quick and easy shabby chic patriotic headband. I’m loving this sweet headband for the upcoming holiday. Baby’s first 4th of July!

Materials Needed:

Navy Blue Shabby Flower

Red/White Dot Fabric Covered Center

Red Felt Circle

Red Chevron Print Fold Over Elastic Headband

Glue Gun

Shabby Flower Chevron Headband 1Step One:

Squeeze a small dob of hot glue in the center of the red felt circle. Then, place these circle onto the back center of your flower like so. Be careful not to burn yourself with the glue.

Shabby Flower Chevron Headband 2Step Two:

Place another dob of hot glue on the center of the backside on your red/white dot fabric covered center. Then press it into the center front of your shabby flower.

Shabby Flower Chevron Headband 4Step Three:

Using your hot glue gun, glue the felt circle on the back of your shabby flower to the fold over loop on the headband as shown below.

Shabby Flower Chevron Headband 6

That’s it! An easy and quick headband for the holiday. You could make this in endless color combinations with the variety of flowers and headbands we sell on our site. One for every outfit in your little diva’s closet!

Shabby Flower Chevron Headband 7Thanks for joining us for this awesome tutorial today. We’d love for you to come back and checkout some of the other great tutorials at Always Under Pay!

 

Tuesday Tutorial: Easy Flower Headband Tutorial

Flower Embell HB Tutorial Announcement

Today I’m going to teach you how to make these super easy flower headbands. These would make a unique and inexpensive gift for a baby shower or even for a little girl’s birthday party.

Materials Needed:

Flower Embell HB Supplies

Flower Embellishments

Headbands (Any of our headbands would work, but I chose to work with the lace headbands and the wide lace headbands.)

Felt Circles

Hot Glue Gun

Step One:

Squeeze a small dob of hot glue in the center of the backside on one of your flower embellishments. Then, place one of your felt circles onto the glue as shown below. Be careful when using hot glue. It is really easy to get a nasty burn.Flower Embell HB Step One Collage

Step Two:

Place another dob of hot glue on the grosgrain loop of the wide lace headband. Or, if you are working with another type of headband, I like to place my glue where the headband is sewn together so that piece won’t show anymore.

Then, place the felt circle on the backside of your flower embellishment into the hot glue against your headband.
Flower Embell HB Step Two Collage
And that’s it! Now wasn’t that easy?

Flower Embell HB Step Three

I made 6 of these in about 5 minutes. And, one lucky commenter will win the whole lot!

Group Flower Embell Headbands

Just leave a comment on this post and we’ll pick a winner on Tuesday morning, May 26, 2015. I’ll shoot for about 10:00 AM MST.