This is a tutorial that first went up on the old blog back in April of 2012. This is still a super fun project, and my niece still has her tutu! She loves it. So, without further ado, here are the instructions on how to make this gorgeous beast!
Tutorial: How to Make a Ribbon Tie Tulle Tutu
We’ve decided as mentioned in our earlier post that we need to teach people a little something about some of the craft products we carry. There are lots of really cute things you can make relatively easily and inexpensively on your own, and we’d love to share some ideas with you.
So, today I want to show you how to make a simple ribbon tie tutu. Learning how to make a tutu is really very easy. There are other variations on this, you can even use elastic if you have it. I love this idea because you can use any colors you want, just as puffy as you like, and really personalize your own creations.
You will need:
6″ X 25 Yd Rolls of Wholesale Tulle (I used 4 rolls–Purple, Lavender, Light Green, and Turquoise–that’s a new color! I didn’t end up using the white pictured.) The amount you need will depend on the size of girl and length of tutu you are making. This was for a 7 year old girl, whose waist was about 24″, and the length is approx. 13”. You can make just a tutu skirt with a shorter length or a tutu dress with a bit of a longer length. Just measure against the person you wish to make this for.
Grosgrain Ribbon (I used 7/8″ Solid Purple Grosgrain)
Scrap Piece of Cardboard
Cut a piece of cardboard about the length that you would like your skirt to be, adding an extra inch for tying and fluff factor.
Wrap your tulle around the cardboard lengthwise. I just used the whole roll, so I’m not really sure how many times. But you can err on the side of caution and just do a few passes of each color at once.
Cut the tulle on one side of the cardboard. This will give you pieces twice the length of your skirt. This is good. Don’t panic. They are supposed to be that long.
Once all of your tulle is cut, you can cut your ribbon. Use the waist of the girl you are making the tutu for as a measure. Wrap the ribbon around the waist, then add an extra couple of feet so you’ll have what you need plus enough for tying a nice bow at the end.
Measure about about a foot in (or more if you like) to your ribbon and tie a knot. This is to keep the tool from sliding off of your ribbon. This is the start of the waist on your skirt.
Now take the ends of your tulle up over the ribbon and through the loop. Pull tight. The tighter you pull these knots and push them together, the fuller your skirt will be. If you don’t want it too full, pull your knots a bit looser, but tight enough to stay put.
Now you can just tie a pretty bow in the back, and you are set! Voila, easy peasy inexpensive custom made one of a kind tutu!
I love the colors of this tutu. I think it turned out so darling, fun and Spring-y! I simply love this fluffy tutu. Making tutus for your boutique would be much easier than you think. If you just don’t have time to make tutus, we also carry wholesale tutus that are only $2.99 each!
Also, if you’re just dying to know how to make that matching hair piece, you can find the tutorial for that here.
Thanks for joining us for this awesome tutorial today. We’d love for you to come back and checkout some of the other great tutorials at Always Under Pay!